Ultrasonic flaw detection equipment for pipes, rods

TG-310TⅡX Ultrasonic flaw detection equipment for pipes, rods

Our pipe (rod) ultrasonic flaw detection system is suitable for ultrasonic testing of small-diameter thin-walled pipes and small-diameter rods. According to customer needs, 4/6/8 channel detection can be selected. The probe main head rotates around the pipe at high speed for scanning. The entire equipment upper and lower racks and sorting devices are all made of stainless steel and aluminum alloy profiles. The instrument adopts advanced design concepts and manufacturing technologies. It performs real-time digital processing of the real-time collected ultrasonic echo signals, and can analyze and record the test results at the same time. It also has delayed marking and sound and light alarms. It has a high degree of automation, reliable detection accuracy, and good system stability.

Model:
TG-310TⅡX

Availability:

Quantity:



Inquire Add to Basket

Ultrasonic Flaw Detection

Ultrasonic Flaw Detection

Ultrasonic flaw detection equipment for pipes, rods

Our pipe (rod) ultrasonic flaw detection system is suitable for ultrasonic testing of small-diameter thin-walled pipes and small-diameter rods. According to customer needs, 4/6/8 channel detection can be selected. The probe main head rotates around the pipe at high speed for scanning. The entire equipment upper and lower racks and sorting devices are all made of stainless steel and aluminum alloy profiles. The instrument adopts advanced design concepts and manufacturing technologies. It performs real-time digital processing of the real-time collected ultrasonic echo signals, and can analyze and record the test results at the same time. It also has delayed marking and sound and light alarms. It has a high degree of automation, reliable detection accuracy, and good system stability.

Flaw Detection Technical Data

Ultrasonic flaw detection equipment for pipes, rods

Application range: Ф6～Ф35mm;

Wall thickness: 0.6mm～5mm
Detection length: non-standard customization
Detection object: thin-walled pipes, small-size rods

Plane layout: For specific and accurate dimensions, see the design plan layout diagram (actual available area dimensions on site).

Learn more

System technical parameters:
Detection method: Water immersion focusing detection method
Operation mode: Bar material moves forward in a straight line
System working mode: Offline fully automatic flaw detection
Working mode: Batch automatic continuous detection work
The minimum speed of the rotating head relative to the bar material is ≥200 rpm; The maximum speed of the rotating head relative to the bar material is ≥2000 rpm
Operation mode: Fully automatic detection control under PLC control
Marking accuracy: ±20mm
Flaw detection classification: qualified area, unqualified area
End blind area: ≤80mm
Working frequency: 5MHz, 10MHz, 15MHz
Alarm form: Sound and light alarm, and output alarm electrical signal at the same time. The PLC output signal drives the marking.